- Wednesday
- December 4th, 2024
- Publier un document
SAN-OM-29
Probability density function of the instantaneous amplitude CHARACTERIZATION AND MODELLING EMI FROME LECTRIC DISCHARGES: A LITERATURE REVIEW Introduction: Communications technology for smart grid applications is an area of growing interest as mentioned in many publications(Yanetal.,2013;Gungoretal.,2011,2010;GungorandLambert, 2006; Amin and Wollenberg, 2005)....
Soutenance mémoire
Specific research objectives Although POSS are nanoscaled molecules by nature, a vast majority of them exist in the form of crystalline solids at the micron scale. Consequently, besides proper selections of POSS, fabrication methods play a vital role in achieving...
Physical properties of dielectrics for high voltage applications During operation, an electrical insulation system can be exposed to several kinds of stress factors, which can be of thermal, electrical, ambient and mechanical nature, often referred to as the “T.E.A.M.” stresses,...
Semi-solid Metal Processing EXPERIMENTAL PROCEDURES: The current investigation is divided into three sections. In the first section, the effect of phosphorus, strontium and processing parameters on the processability and microstructure of semi-solid 390 alloy was studied. Due to the difficulties...
Ferroelectric FET The Ferroelectric Field Effect Transistor (FeFET) memory is a 1T memory device where a ferroelectric capacitor is integrated into the gate stack of a FET. The ferroelectric polarization directly affects charges in the channel and leads...
Characterization of partial discharges in transformer oil As natural degradation is often slow for testing insulation performance of transformer oil over its whole lifespan, the investigation was based on studying the aging effect with accelerated speed in laboratory conditions. The...
